Latest NewsCable LayingDeme Offshore Secures Sizable Inter-Array Cable Contract For Dogger Bank C Windfarm...

Deme Offshore Secures Sizable Inter-Array Cable Contract For Dogger Bank C Windfarm In The UK

DEME Offshore, subsidiary of the DEME Group, announced it has been awarded a sizable EPCI contract for the inter-array cables at the Dogger Bank C wind farm in the UK.  Dogger Bank C is the third phase of the 3.6 GW Dogger Bank Wind Farm which currently is the world’s largest offshore wind farm under development. Today’s announcement follows the earlier awarding of Dogger bank A and B inter-array cable contract in early 2021.

The scope of this new EPCI agreement includes the engineering, procurement, construction and installation of the subsea cables for the 1.2 GW phase of the wind farm.  DEME Offshore will supply, install and protect approximately 250 km of 66 kV inter-array cables and all related accessories.

Dogger Bank Wind Farm is located more than 130km off the North East coast of England and is currently being delivered by joint venture partners SSE Renewables, Equinor and Eni. The wind farm is being developed in three 1.2 GW phases, A, B and C. Upon completion, Dogger Bank will be the world’s largest offshore wind farm and will generate energy to power up to 6 million homes every year.

Production of the cable for Dogger Bank C is set to start in 2023.  The cables will be installed in 2025 and DEME will once again be deploying its DP3 cable installation vessel ‘Living Stone’.   Living Stone boasts an inhouse designed dual-lane system, consisting of two cable highways – this allows cable laying using one lane whilst the next cable can be simultaneously prepared and have the cable protection system (CPS) installed on the other lane. As previously demonstrated, this significantly reduces the time needed for preparing the cables, minimises manual handling, increases the vessel’s workability and ultimately, improves production rates.

Bart De Poorter, General Manager of DEME Offshore comments: “After securing the Dogger Bank A and B inter-array cable contract earlier this year, we are proud to now also confirm the inter-array cable contract for the Dogger Bank C wind farm. This contract not only demonstrates the unrivalled cable-laying capabilities by our DEME Offshore team, it is also further testament to the stellar reputation of our DP3 cable installation vessel ‘Living Stone’.”

Simon Bailey, Commercial Director for Dogger Bank Wind Farm says“We are delighted to award the contract for the supply, installation and protection of the inter-array cables at Dogger Bank C wind farm to DEME Offshore, extending our existing relationship with DEME on phases A and B to the third phase of this project. This will ensure continued synergies across the construction activities of the offshore wind farm, including the deployment of DEME’s state-of-the-art cable installation vessel ‘Living Stone’ which will install the almost 250 km of 66 kV inter-array cables required to connect Dogger Bank C’s offshore turbines.”

Dogger Bank A and B is a joint venture between SSE Renewables (40%), Equinor (40%) and Eni (20%). On 2 November 2021 SSE and Equinor announced the sell down of a combined 20% share in Dogger Bank C to Eni (10% each). The transaction is expected to close in Q1 2022, subject to regulatory and lenders approvals and customary purchase price adjustments. Eni will enter the asset effective from completion of the sell down transaction. Once the transaction is complete, the new overall shareholding in Dogger Bank C will be SSE Renewables (40%), Equinor (40%) and Eni (20%).

Latest News

DBMatic, part of De Boer Marine, and Weforsea Shipping have joined forces to launch MariControl, a new maritime data technology company combining their respective expertise in vessel hardware, data infrastructure, software and digitalisation.

MariControl Launched to Simplify Vessel Digitalisation

MariControl brings DBMatic’s hardware and data infrastructure together with Weforsea Shipping’s software and maritime digitalisation expertise DBMatic, part of De Boer Marine, and Weforsea Shipping...
Robert Allan Ltd. has secured a contract to design a new RAmparts 4300 ASD tug for Guangzhou Port, China, marking the first Robert Allan Ltd.-designed tug to join the port’s fleet.

Guangzhou Port Orders RAmparts 4300 tug

New Robert Allan Ltd. designed RAmparts 4300 ASD tug to deliver approximately 92 tonnes of bollard pull for coastal towing, offshore support and anchor-handling...
Kongsberg Maritime has secured a contract to supply a fully integrated suite of technology and equipment for a new multi-purpose deepwater installation and construction vessel to be owned and operated by Solstad Offshore and SBM Offshore.

Kongsberg Maritime Secures Technology Package for New Deepwater Vessel

Comprehensive Kongsberg Maritime package combines deck machinery, dynamic positioning, propulsion and energy systems for new Solstad and SBM Offshore deepwater vessel Kongsberg Maritime has secured...
Everllence has signed a major contract with Turkish shipyard, Uzmar for 16 × 175D gensets for four Rampage 6000-DE offshore terminal tugs designed by Robert Allan Ltd. The new tugswill be operated by Smit Lamnalco, a Boskalis company, in Guyana, South America, supporting the FPSO (Floating Production Storage and Offloading) fleet operating in the Stabroek Block.

Everllence 16-Genset Contract for Smit Lamnalco Tugs

Four Rampage 6000-DE offshore terminal tugs will support Smit Lamnalco’s FPSO operations in Guyana’s Stabroek Block Everllence has signed a major contract with Turkish shipyard,...

Related news