Latest NewsPower & PropulsionDNV awards AIP to Oceanbird Wing 560

DNV awards AIP to Oceanbird Wing 560

Niclas Dahl, Managing Director OCeanbird
Niclas Dahl, Managing Director, Oceanbird

The first wing sail from Oceanbird, Wing 560, has received Approval in Principle (AiP) from the world’s leading classification society DNV.

“This is an important milestone for Oceanbird in our quest to cut emissions from shipping” says Niclas Dahl, Managing Director Oceanbird.

The discussions with DNV that led up to the AiP, started before there even was an Oceanbird concept. Even though Oceanbird was confident in the design, there were a few uncertainties.

“It is one of the first stiff wing sails that will tilt in hard winds as a safety feature, that gets an Approval in Principle. Therefore, it is reassuring that DNV supports our safety philosophy since we are now going from vision into realization. In just a few months, we will begin to assemble our first full-scale wing prototypes, which will be onboard a vessel in about one year from now” says Niclas Dahl, Managing Director at Oceanbird.

No showstoppers found

An Approval in Principle is an independent assessment of a concept within an agreed framework, confirming that the design is feasible, and that no significant obstacles, so called showstoppers, exist to prevent the concept from being realized. DNV have looked into how the wing could handle extreme conditions such as heavy wind loads, snow and ice loads and green sea (waves on deck). They have also investigated redundancies in system functionalities (trimming, reefing, folding, etc.), control systems, the foundation and machinery and electrical component functionalities.

“We’re pleased to award Oceanbird the AiP for their wind-assisted propulsion system (WAPS). Such systems hold promise in enhancing the efficiency of maritime operations, and partnerships like this play a significant role in moving the industry towards decarbonization,” remarked Hasso Hoffmeister, Senior Principal Engineer at DNV. “With our extensive knowledge in this domain, DNV is eager to collaborate and foster the advancement of these innovations.”

Safety first

Oceanbird have requested that the review should include documents beyond the minimum requirements to reduce uncertainties related to the concept.

“Safety is our first priority and therefore, we wanted DNV to do a comprehensive review of the design” says Mikael Razola, Technical Director at Oceanbird. “The good collaboration with DNV has been very important for us. We are confident in our design, and this strengthen us into going into the next steps which is a Type Approval and prototype assembly.”

Komposits
The parts to the first full-scale prototype are starting to take shape.

Latest News

ZF is using SMM to showcase its latest marine propulsion technologies, including new higher-power transmission and thruster solutions designed for larger, more complex and increasingly hybridised commercial vessels.

ZF Unveils Higher-Power Transmission and Thruster

New ZF 9200 A/V PTI transmission and AT 110 thruster extend the company’s marine portfolio into higher power classes ZF is using SMM to showcase...
Wescom Group will showcase a range of new products at this year’s SMM, alongside its established portfolio of SOLAS pyrotechnics, marine safety electronics and pharmaceutical solutions.

Wescom Reveals Next-Gen Marine Safety Tech

New PLB and EPIRB solutions extend Wescom’s portfolio of connected marine safety and survival technology Wescom Group will use this year’s SMM to showcase a...
Bencros Marine Fenders, the Slovakia-based manufacturer of rubber fenders for ports, tugs and workboats, has announced that the CO₂ savings associated with its recycled-rubber fenders have been independently verified and can now be transferred to customers as certified emission reductions. The first certificates are scheduled to go live on 2 September 2026 through the Proba carbon standard registry.

Bencros Fenders Gain Independently Verified CO₂ Savings

World’s first: Bencros Marine Fenders, issues emission reduction certificates for reprocessed rubber fenders 13,112 tonnes of CO₂e savings independently verified by Bureau Veritas for...
Finnish marine propulsion specialist Steerprop has secured an order from Bollinger Shipyards to supply complete propulsion packages for four Arctic Security Cutters (ASCs) being built for the US Coast Guard. Each vessel will be fitted with two Steerprop Contra-Rotating Propeller (CRP) azimuth propulsors and two tunnel thrusters, providing high manoeuvrability and enhanced performance in demanding Arctic operating conditions

Steerprop Secures Propulsion Deal for Four Arctic Cutters

Steerprop will equip four US Coast Guard Arctic Security Cutters with ice-class propulsion systems Finnish marine propulsion specialist Steerprop has secured an order from Bollinger...

Related news