Power & PropulsionElectricEST-Floattech contracted to power new Damen Electric Fast Ferry for Reederei Norden-Frisia

EST-Floattech contracted to power new Damen Electric Fast Ferry for Reederei Norden-Frisia

The recently launched EST-Floattech Octopus Series battery system will be installed onboard the new Damen Electric Fast Ferry for AG Reederei Norden-Frisia. The German Ferry operator is taking steps towards achieving its vision of a green future by partnering with Damen Shipyards, one of the world’s leading shipbuilders, for the design and construction. The fully electric vessel will transport passengers fast, clean and comfortable thanks to EST-Floattech’s battery system.

The ferry will operate between Norddeich and the island of Norderney, which required Damen to develop a completely new vessel: the Damen Electric Fast Ferry (EFF) 3209 – known as the E-Cat Ferry. A standard vessel was impossible due to the shallow waters in which the ferry must operate. Secondly, the ferry will sail seven times a day, for which the vessel’s draft is limited to a maximum of 1.2 meters. A challenge for which Damen found a solution.

Fast charging

The fleet of Reederei Norden-Frisia will be extended with this 32-meter-long, fully electric catamaran. The E-Cat Ferry can carry up to 150 passengers. With the EST-Floattech High Energy Octopus Series battery system, the ferry can reach speeds of up to 16 knots and can charge within half an hour. 

EST-Floattech sized the battery system after calculating performance and lifetime data, based on the specified load profile of this vessel. The electrical installation of the vessel will be provided by system integrator Royal van der Leun, with whom EST-Floattech has had previous successful collaborations. The battery system is Lloyd’s Register type approved and the new ferry will sail under Lloyd’s Register classification.

Sustainable solution for UNESCO World Heritage Site

Jelle Meindertsma, Sales Manager at EST-Floattech: “It is satisfying to be part of a challenging and innovative project that contributes to a cleaner environment. In this case, an electric ferry that will be sailing in the Wadden Sea, which is a UNESCO World Heritage Site, comes with strict design criteria. Our team worked diligently to ensure that the Octopus Series High Energy Battery System met the requirements. The battery system will ensure that the ferry can sail at the needed speed and charge during stops without CO2 emissions, providing a sustainable and eco-friendly transport solution.”

“We have already increased sustainability on land and two years ago we decided it was time to take a look at our fleet,” says Michael Garrelts, Norden-Frisia Marine Superintendent. “For our fleet, we believe it is elementary that the battery system corresponds to the latest technology and safety standards, and that we can create a balanced power-to-weight ratio.”

Damen Shipyards expressed its delight in partnering with EST-Floattech on this state of the art fully electric ferry: “We are very excited about this project, which is a significant step towards Damen’s goal of reducing the environmental footprint of our vessels while maintaining optimal performance with EST-Floattech’s Lithium-Ion cells.”

Once the hull has been constructed at Damen’s yard in Kozle, it will be transported to Damen Shipyards Gorinchem for outfitting. The vessel is scheduled for delivery to Norden-Frisia in May 2024. We can expect the demand for this type of vessel to grow as more passengers are consciously looking to contribute to the energy transition.

Latest News

ZF is using SMM to showcase its latest marine propulsion technologies, including new higher-power transmission and thruster solutions designed for larger, more complex and increasingly hybridised commercial vessels.

ZF Unveils Higher-Power Transmission and Thruster

New ZF 9200 A/V PTI transmission and AT 110 thruster extend the company’s marine portfolio into higher power classes ZF is using SMM to showcase...
Wescom Group will showcase a range of new products at this year’s SMM, alongside its established portfolio of SOLAS pyrotechnics, marine safety electronics and pharmaceutical solutions.

Wescom Reveals Next-Gen Marine Safety Tech

New PLB and EPIRB solutions extend Wescom’s portfolio of connected marine safety and survival technology Wescom Group will use this year’s SMM to showcase a...
Bencros Marine Fenders, the Slovakia-based manufacturer of rubber fenders for ports, tugs and workboats, has announced that the CO₂ savings associated with its recycled-rubber fenders have been independently verified and can now be transferred to customers as certified emission reductions. The first certificates are scheduled to go live on 2 September 2026 through the Proba carbon standard registry.

Bencros Fenders Gain Independently Verified CO₂ Savings

World’s first: Bencros Marine Fenders, issues emission reduction certificates for reprocessed rubber fenders 13,112 tonnes of CO₂e savings independently verified by Bureau Veritas for...
Finnish marine propulsion specialist Steerprop has secured an order from Bollinger Shipyards to supply complete propulsion packages for four Arctic Security Cutters (ASCs) being built for the US Coast Guard. Each vessel will be fitted with two Steerprop Contra-Rotating Propeller (CRP) azimuth propulsors and two tunnel thrusters, providing high manoeuvrability and enhanced performance in demanding Arctic operating conditions

Steerprop Secures Propulsion Deal for Four Arctic Cutters

Steerprop will equip four US Coast Guard Arctic Security Cutters with ice-class propulsion systems Finnish marine propulsion specialist Steerprop has secured an order from Bollinger...

Related news