Offshore WindFloating Offshore WindSaitec plans the installation of a pre-commercial pilot park on the Costa...

Saitec plans the installation of a pre-commercial pilot park on the Costa Brava

The Spanish engineering company Saitec has announced its interest in developing a pre-commercial pilot park with 5 units and a total potential of 50MW in the Mediterranean Sea in 2025. The offshore wind turbines will use SATH technology in open sea in Girona, specifically in an area located more 15 km from Cap de Creus on the Costa Brava (Catalonia)

Medfloat Pilot Parc has started with the presentation of the Initial Project Document for assessment by the competent environmental body, which will answer with information on the scope that the environmental impact study should have. However, Saitec is already carrying out drafting work on the Environmental Impact Study.

Medfloat Pilot Parc will involve the creation of a test infrastructure in the Levantino-Balearic Demarcation for the testing, demonstration, and validation of SATH technology. It will also demonstrate the technical, environmental and social feasibility of future developments of floating offshore wind energy, and particularly of SATH technology, in the Mediterranean.

At the same time, it aims to become a pioneering project to investigate the possibilities of shared use with other activities, especially with fishing and aquaculture, as well as the promotion of employment and boost the supply chain of offshore wind energy in Catalonia. In addition, the wind turbines will potentially provide power for 50,000 homes.

The selected installation area has been provisionally defined as Priority Use for offshore wind power in the Maritime Spatial Planning Plans of Spanish Government. At the same time, meets the right wind and depth conditions to launch this project.

Medfloat Pilot Parc is an initiative aligned with the climate neutrality objectives and one  step forward in consolidating SATH technology  after the development of the pioneering 2 MW DemoSATH project, which is currently under construction in the port of Bilbao. The objective of this pilot project, carried out in collaboration with RWE, is to test the technology and progress in the industrialized manufacturing process for this solution.

DemoSATH will be installed in the BiMEP test area (Biscay, Spain), where tests will be carried out for two years, providing useful information for the environmental evaluation of MedFloat. DemoSATH will be the first floating offshore wind turbine connected to the Spanish grid and capable to provide power to 2,000 homes.

Latest News

Inland and Coastal Marina Systems has supplied three heavy-duty concrete tug berth pontoons for the modernisation of the Tidal Basin at HM Naval Base Portsmouth, replacing ageing berthing infrastructure that had been in service for more than 40 years.

New Tug Berths for Portsmouth Naval Base

Three purpose-designed pontoons form part of a wider berthing upgrade delivered for KBS Maritime at HM Naval Base Portsmouth Inland and Coastal Marina Systems has...
SAFE Boats International, a US manufacturer of high-performance aluminium vessels for military, law enforcement and emergency response operations, has secured a five-year Blanket Purchase Agreement (BPA) valued at up to $36.4 million to support U.S. Southern Command (SOUTHCOM) Foreign Military Sales (FMS) programmes.

SAFE Boats Secures $36.4 Million Patrol Vessel Agreement

Five-year agreement will support US Foreign Military Sales programmes, with initial patrol vessel deliveries to four Caribbean nations scheduled from 2027 SAFE Boats International has...
Hydrex carried out temporary hull repairs on a 67-metre shallow-water barge during June, adapting its original repair plan to overcome challenging weather and sea conditions while maintaining safe working practices. The work was undertaken while the barge was in the Norderney and Delfzijl areas, with damage identified in void tanks 4 and 6.

Hydrex Adapts Repair Strategy for Barge Hull Repairs

Challenging sea conditions prompt Hydrex to adopt an alternative repair method for damaged sections of a barge hull Hydrex carried out temporary hull repairs on...
Damen Shipyards Group has placed a new order with EST-Floattech for two Octopus Series battery systems for installation aboard Damen Combi Freighter (CF) 3850 vessels, renewing the framework agreement between the two companies.

Damen Orders Two More Octopus Battery Systems

Damen Shipyards Group has renewed its framework agreement with EST-Floattech, ordering two Octopus Series battery systems for its Combi Freighter 3850 Damen Shipyards Group...

Related news