Latest NewsArriva Shipping Advances Fleet Efficiency with Berg Propulsion Retrofit

Arriva Shipping Advances Fleet Efficiency with Berg Propulsion Retrofit

Norwegian shipowner Arriva shipping has confirmed fuel savings of approximately 10% following the successful retrofit of a propulsion control and optimisation system on the general cargo vessel MV Norjarl. Based on these proven results, the company has committed to a second Energy & Efficiency retrofit project with Berg Propulsion.

In early 2025, Arriva Shipping worked with Berg Propulsion to retrofit the 5,335 gt MV Norjarl with the MPC800 control system and Dynamic Drive. The enhancement was designed to optimise propulsion performance at lower operating speeds, so that the 2009-built ship would retain its competitive edge in shipping’s low carbon era.

Monitoring over several months to track Norjarl’s performance in the North Sea and Baltic Sea has confirmed overall fuel savings of above 10 percent, according to Arriva. The results have led the owner to contract a second Berg retrofit involving the 4,183 gt general cargo carrier Norbris.

“The Norjarl project showed the impact introducing state-of-the-art control technology could have when an existing ship is designed and maintained to the highest standards,” said Paul Helland, Technical Manager, Arriva Shipping. “After verifying the gains, we move forward with Norbris.”

Installed with a MAN 6L32/40 engine, Norjarl previously featured propulsion control from another supplier. In the case of Norbris, built in 2002, the MPC800 control unit and Dynamic Drive will supersede existing Berg Propulsion ERC2000 technology to work with the ship’s MaK 6M32C engine.

In both cases, the combination of Dynamic Drive and auxiliary generators provides an economical route to flexibility in engine speed control, said Magnus Thorén, Energy & Efficiency Sales Manager, Berg Propulsion.

“We have installed control systems and the Dynamic Drive solution on board several Arriva newbuilds, and the owner has become a key Berg Propulsion customer in Norway,” said Thorén. “The Norjarl retrofit involved close collaboration through installation and performance evaluation, so it is especially pleasing that the owner is confirming that the thinking behind the first project has been borne out by experience to drive a second.” Energy & Efficiency projects helped owners extend the life of pre-2010 ships to compete at a time of volatile fuel costs, emissions trading and carbon intensity ratings, added Thorén.

The follow-up project is also a notable success for Saga Marine, which represents Berg Propulsion in Norway. Eirik Lutnaes, Saga Marine, said: “There are plenty of good quality ships out there with the potential to perform cost effectively, competitively and sustainably using modern control and drive technology. We are delighted to work with Berg Propulsion in support of Arriva’s fleet renewal strategy.”

Categories:

Latest News

LD Armateurs Group has taken delivery of the DP2 multipurpose support vessel TVO Mariner, strengthening the Group’s fleet and expanding the offshore capabilities of its subsidiary LD TravOcean, which specialises in subsea cable installation and protection.

LD Armateurs Takes Delivery of DP2 Vessel TVO Mariner

DP2 multipurpose support vessel TVO Mariner, expands LD TravOcean’s capabilities across subsea cable, telecommunications and offshore wind projects LD Armateurs Group has taken delivery of...
PaxOcean Group, a member of Kuok Maritime Group, and Ulstein Design & Solutions AS have signed a contract for the design and construction of a new ULSTEIN SX222 Service Operation Vessel (SOV) for NYK Line (Nippon Yusen Kabushiki Kaisha).

NYK Selects ULSTEIN SX222 for New Offshore Wind SOV

PaxOcean and Ulstein join forces to deliver NYK’s next-generation offshore wind SOV PaxOcean Group, a member of Kuok Maritime Group, and Ulstein Design & Solutions...
Dutch winch specialist Dijvler is expanding into the sea-going vessel market following the acquisition of the rights, designs, drawings and certifications of C-Nautical, enabling the company to launch a new standardised range of anchor and mooring winches for cargo vessels and offshore support vessels. With nearly 50 years of experience supplying anchor and mooring winches for inland waterway vessels, Dijvler is now applying its established engineering expertise to the wider commercial marine sector. The company expects to deliver its first orders for the new programme in 2027.

Dijvler Targets Sea-Going Vessels With New Winch Range

Dutch winch specialist Dijvler, builds on nearly 50 years of inland vessel experience with a new standardised range for cargo and offshore support vessels Dutch...
Safehaven Marine has launched Ederra 8, an 18-metre Interceptor 60 pilot boat built for the MVD Pilots Association in Montevideo, Uruguay. The vessel is the third pilot boat Safehaven Marine has built for the Montevideo pilots and the fourth vessel supplied to the organisation overall. The latest delivery follows the Ederra 6 and Ederra 7, two Interceptor 48 pilot boats delivered in 2022, which have been operating successfully with the pilots over recent years.

Safehaven Marine Launches Interceptor Pilot Boat Ederra-8

Safehaven Marine has launched Ederra 8, an 18-metre Interceptor 60 pilot boat built for the MVD Pilots Association in Montevideo, Uruguay https://youtu.be/a7ImyS0Er70?si=glEf4QIrKSlrVSZk Safehaven Marine has launched...

Related news