Vessel Repair & MaintenanceAntifoulingProven Protection Against Cavitation Damage

Proven Protection Against Cavitation Damage

Cavitation erosion and corrosion remain persistent challenges in marine operations, often causing severe damage to rudders, thruster tunnels, and other underwater components. This leads to frequent drydockings, costly repairs, and operational downtime. However, Subsea Industries’ glassflake-reinforced protective coating Ecoshield, has emerged as a trusted solution. Through real-world case studies, shipowners have demonstrated that Ecoshield not only halts erosion but dramatically reduces long-term maintenance costs.

Understanding the challenge

Cavitation is the formation and collapse of vapor bubbles caused by changes in water pressure near metal surfaces. The forceful collapse of these bubbles eats away at exposed steel, especially around rudders and thruster tunnels, leading to rapid deterioration. Traditional coatings often fail to withstand such stress, eroding within months and requiring frequent reapplication.

Ecoshield was engineered to withstand these aggressive forces. Applied in two layers, the coating forms a hard, durable shield that adheres tightly to steel. Unlike conventional paints, it does not need to be reapplied at every drydocking. Instead, minor touch-ups suffice even after many years of service. These touch-ups blend in perfectly with the existing coating.

Besides offering rudder protection, Ecoshield is also suitable for all underwater ship gear that needs special protection against cavitation and corrosion. 
Besides offering rudder protection, Ecoshield is also suitable for all underwater ship gear that needs special protection against cavitation and corrosion. 

Case study snapshots

Ernst Russ fleet

In 2004, German shipowner Ernst Russ faced persistent cavitation damage on the rudder of their container vessel Elizabeth Russ. After applying Ecoshield, they observed that the damage stopped completely. The success led to Ecoshield being applied across the company’s fleet.

Mediterranean Shipping Company (MSC)

With a massive container ship fleet, MSC required a durable solution to reduce maintenance. After initial positive results, Ecoshield has been adopted for over 100 of their vessels so far, applied not only to rudders but also to thruster tunnels, bulbous bows, and even boottops. This upgrade to MSC’s container fleet is continuing. The consistent performance across a variety of surfaces cemented its place as a core element of their protective maintenance strategy.

CMA CGM

Major French shipping line CMA CGM first applied Ecoshield to protect the rudder of one of their container ships in January 2011. Since then, they have continued to use Ecoshield on the rudders, Becker Twisted Fins®, thruster tunnels, and bulbous bows of more than 100 ships.

Seaspan

Canadian shipowner Seaspan discovered the value of Ecoshield in 2010. Since then, they have experienced great success using the coating to protect the running gear of over 100 ships under their management, including many newbuilds. Notably, rudders coated with Ecoshield required no repairs even after 9–10 years, saving up to three days in drydock per ship.

Danaos Shipping

One of the world’s largest independent container charter ship owners, Danaos Shipping, began using Ecoshield for their rudders in 2008. About 40 successful applications later, they have extended the use of Ecoshield to thruster tunnels and other parts of their ships.

Efficient application with long-term payoff

Ecoshield is designed with operational flexibility in mind. The application involves grit blasting the steel surface and then applying two coats of Ecoshield. These coats can be applied in quick succession—just three hours apart—making it possible to complete the process within a single day during scheduled drydockings.

Ecofix, a steel-repair filler compatible with Ecoshield, is used to rebuild the substrate where cavitation has already taken its toll. This avoids the need for hot work and complex steel replacement procedures. Once applied, the Ecoshield coating seals the surface for long-term protection.

Real-world savings

Operators report significant cost reductions thanks to reduced drydock time and minimal reapplication needs. The estimated savings per ship are substantial—not just in coating costs but also in lost time, labor, and operational disruption.

Moreover, the use of Ecoshield eliminates the need for sacrificial anodes on rudders, reducing complexity and weight while delivering consistent protection.

Conclusion: A future-proof investment

Shipowners worldwide are turning to Ecoshield as a proactive measure against cavitation and corrosion damage. With proven performance across over 1,000 applications, the coating is more than a short-term fix—it’s a long-term investment in vessel integrity, efficiency, and cost savings.

Latest News

Svitzer has taken delivery of another TRAnsverse 2900 tug from Cheoy Lee shipyard

Svitzer Takes Delivery of Another TRAnsverse 2900 Tug

The latest TRAnsverse 2900 tug delivery from Cheoy Lee’s Hin Lee shipyard adds to Svitzer’s expanding fleet as its 27-vessel newbuild programme continues to...
GONDAN Shipbuilders has secured a contract with AB Göteborg-Styrsö Skärgårdstrafik (Styrsöbolaget) to design and build three fully electric passenger catamarans for operation in Gothenburg’s southern archipelago.

GONDAN Wins Contract for Gothenburg Electric Ferries

The contract forms part of Styrsöbolaget’s long-term passenger transport commitment in Gothenburg’s southern archipelago, supporting the transition to fully electric ferry operations GONDAN Shipbuilders has...
Built by Uzmar Shipyard for Norwegian operator Buksér og Berging, the Bryteren is a compact ice-class tug designed to support ship-assist, towing and ice-management operations in demanding northern waters. Based on Robert Allan Ltd.’s TundRA 2200 design, the tug combines powerful towing capability with enhanced manoeuvrability and specialised cold-weather features, enabling it to operate reliably in challenging ice conditions.

New Ice-Class Tug ‘Bryteren’ Delivered to Buksér og Berging

Designed for operation in temperatures down to -25°C, the tug 'Bryteren' combines icebreaking capability, specialised winterisation and powerful propulsion Built by Turkish shipbuilder Uzmar Shipyard...
Muir Mhòr Offshore Wind Farm has secured offshore planning consent from the Scottish Government, paving the way for one of the world’s first commercial-scale floating offshore wind farms to be developed in Scottish waters. The approval marks a significant milestone for the flagship ScotWind project, which is planned for Scotland’s east coast, approximately 63km from Peterhead.

Scottish Floating Wind Farm Project Gets Green Light

The project has now received the green light, with both offshore and onshore planning approvals secured, paving the way for development of one of...

Related news