Latest NewsShip & Boat BuildingVan Oord’s offshore installation vessel Boreas launched

Van Oord’s offshore installation vessel Boreas launched

Van Oord’s new offshore installation vessel Boreas was successfully launched at the Yantai CIMC Raffles Offshore Ltd. shipyard in China. The Boreas’ dual fuel engine set is able to run on methanol and is purpose-built for the transport and installation of the next generation foundations and turbines at offshore wind farms. Commercial availability is expected in 2025.  

Upon completion, the Boreas will be the largest vessel of its kind. Because of its size, the launch was a challenging job. First, it had to be moved from the construction site to the quay, using the so-called ‘skidding method’. Skidding is a safe and efficient load-out method for the horizontal transport of heavy and oversized objects along a linear track. The offshore installation vessel was then skidded from the quay onto two pontoons. These pontoons were later submerged in a controlled operation after which the Boreas became afloat. After safely moored alongside, the works on the Boreas will continue with the installation of the main crane and the extension of the legs of the jack-up vessel. Meanwhile the vessel’s technical installation will be further commissioned, after which sea trails will take place to test performance. Subsequently, the Boreas will be handed over by the Shipyard to Van Oord.

‘The launch of the Boreas is a major milestone for Van Oord. A big thanks to the project teams and all subcontractors and suppliers who worked with great commitment and dedication towards this crucial stage of the construction process. With the Boreas now afloat, we’re entering the final stages of the newbuilding, and we are excited to continue our journey towards successful delivery!’ — Johan de Graaf, Project Manager Shipbuilding at Van Oord

The Boreas is preparing Van Oord for the increase in scale in the offshore wind industry. The vessel measures 175 metres in length and has a crane with a 155-metre-high boom, able to lift over 3,000 tonnes. Four giant legs, each measuring 126 metres, allow the vessel to be jacked up and work in waters up to 70 metres deep. It will therefore be able to install the next generation of 20 MW offshore wind turbines at sea.

    Being an example of the energy transition within Van Oord, the Boreas is the first of its kind to be able to run on the future fuel methanol, reducing the ship’s carbon footprint by more than 78 percent. In addition, the vessel will be equipped with a cutting-edge active emissions control technology (Selective Catalytic Reduction) to reduce the NOx emission to an absolute minimum. A battery pack of about 6,000 kWh can take peak loads and regenerate energy to reduce the fuel consumption and corresponding emissions even further.

    Latest News

    Nova Shipyard has successfully launched Inis Oirr Express, the second passenger vessel built by the shipyard for Irish ferry operator Doolin Ferry Co.

    Second Doolin Ferry Vessel Hits the Water

    Nova Shipyard launches its second passenger vessel for Doolin Ferry Co., strengthening the partnership between the shipyard and Irish ferry operator Nova Shipyard has successfully...
    Finnish marine propulsion specialist Steerprop will supply its latest contra-rotating propeller (CRP) technology for a fully electric passenger ferry being built by Polish shipyard CRIST SA for the Estonian State Fleet.

    Steerprop to Power Estonia’s First Fully Electric Ferry

    Polish shipyard CRIST SA will integrate two next-generation Steerprop contra-rotating propeller units into Estonia’s first fully electric passenger ferry Finnish marine propulsion specialist Steerprop will...
    Offshore energy services provider Zamil Offshore has ordered a fourth 60-metre ABS-Classed Fast Support Intervention Vessel (FSIV), with Incat Crowther and Singapore-based Lita Ocean appointed to design and build the vessel following the strong operational performance of the existing fleet.

    Zamil Offshore Orders Fourth Fast Support Vessel

    Fourth 60-metre Fast Support Intervention Vessel will expand Zamil Offshore’s capacity to transport personnel, cargo and heavy maintenance equipment in the Arabian Sea Offshore energy...
    LD Armateurs (LDA) and Norsepower have completed the installation of six Norsepower Rotor Sails™ aboard Spirit of Toulouse, the lead vessel in a new fleet of three low-emission roll-on/roll-off (RoRo) ships being built to support Airbus transport operations.

    Six Rotor Sails Installed on Spirit of Toulouse

    Six 35-metre rotor sails installed aboard Spirit of Toulouse, combining wind-assisted propulsion with methanol-capable engines to improve fuel efficiency and reduce emissions LD Armateurs and...

    Related news