Power & PropulsionHybridService ship to be converted to hybrid operation – saves 680 tonnes...

Service ship to be converted to hybrid operation – saves 680 tonnes of carbon dioxide

During the second quarter of 2022 the service ship Northern Skagerrak will be converted to hybrid operation using Esco Power’s Parallel Hybrid Solution. It will run mostly using electric power although there will also be an auxiliary engine that runs on the renewable fuel HVO.

Esco Power – Hybrid Electric Solution Package HESP

Northern Skagerrak will collect oily engine room waste, known as sludge, from ships arriving at the Port of Gothenburg. The Gothenburg Port Authority procured the service from Northern Energy & Supply and the service ship will begin operating during the second quarter of 2022. The conversion will save 680 tonnes of carbon dioxide.

“We are a company that is very much at the forefront in developing innovative solutions. We are grateful once again to be entrusted with the task of working with the Port of Gothenburg on a project that will result in an improved environment in the Gothenburg area,” said David Kristensson, Group CEO at Northern Energy & Supply.

When the invitation to tender for sludge collection was issued, the Port of Gothenburg climate objectives were used as a starting point in the evaluation model. Carbon emission mitigation was one of the quality criteria applied when assessing potential service providers. Following collation and evaluation, the Northern Energy & Supply fossil-free solution proved to be the best option.

“Our aim at the Gothenburg Port Authority is to reduce carbon emissions at the port by 70% by 2030. Northern Skagerrak will serve around 6,000 incoming ships each year and the conversion to hybrid operation will be a significant step in the right direction,” said Erik Waller, Deputy Harbour Master at the Gothenburg Port Authority.

All ports in Sweden are obliged to receive sludge from ships arriving at the port. During operation, the vessels accumulate sludge, which is essentially wastewater containing a mixture of oil residue, cleaning agents, and solvents. The ships leave the wastewater to the port, then it is transported to a purification plant where oil and heavy-metal contaminants are separated from the water.

Fact file: Northern Skagerrak
Length: 45.99 m
Beam: 9.6 m
Draught (fully loaded): 4.0 m
Deadweight: 700 tonnes

Latest News

SAAM Towage has strengthened its regional fleet with the addition of five new tugs during 2026, supporting its ongoing fleet renewal programme and expanding operational capabilities across Latin America.

SAAM Towage Continues Fleet Renewal

Five new tugs deployed across Latin America strengthen SAAM Towage’s operational capability and fleet renewal programme SAAM Towage has strengthened its regional fleet with the...
LD Armateurs Group has taken delivery of the DP2 multipurpose support vessel TVO Mariner, strengthening the Group’s fleet and expanding the offshore capabilities of its subsidiary LD TravOcean, which specialises in subsea cable installation and protection.

LD Armateurs Takes Delivery of DP2 Vessel TVO Mariner

DP2 multipurpose support vessel TVO Mariner, expands LD TravOcean’s capabilities across subsea cable, telecommunications and offshore wind projects LD Armateurs Group has taken delivery of...
PaxOcean Group, a member of Kuok Maritime Group, and Ulstein Design & Solutions AS have signed a contract for the design and construction of a new ULSTEIN SX222 Service Operation Vessel (SOV) for NYK Line (Nippon Yusen Kabushiki Kaisha).

NYK Selects ULSTEIN SX222 for New Offshore Wind SOV

PaxOcean and Ulstein join forces to deliver NYK’s next-generation offshore wind SOV PaxOcean Group, a member of Kuok Maritime Group, and Ulstein Design & Solutions...
Dutch winch specialist Dijvler is expanding into the sea-going vessel market following the acquisition of the rights, designs, drawings and certifications of C-Nautical, enabling the company to launch a new standardised range of anchor and mooring winches for cargo vessels and offshore support vessels. With nearly 50 years of experience supplying anchor and mooring winches for inland waterway vessels, Dijvler is now applying its established engineering expertise to the wider commercial marine sector. The company expects to deliver its first orders for the new programme in 2027.

Dijvler Targets Sea-Going Vessels With New Winch Range

Dutch winch specialist Dijvler, builds on nearly 50 years of inland vessel experience with a new standardised range for cargo and offshore support vessels Dutch...

Related news