Power & PropulsionHydrogenTECO 2030, BLOM Maritime and Samskip receive grant to retrofit LNG Vessel

TECO 2030, BLOM Maritime and Samskip receive grant to retrofit LNG Vessel

TECO 2030, BLOM Maritime and Samskip receive ENOVA grant to retrofit Samskip LNG Vessel with fuel cells and hydrogen fuel. This innovative project aims to significantly reduce emissions from this LNG-fueled vessel, which currently operates on a weekly multipurpose service from Rotterdam, The Netherlands and along most of the Norwegian coastline to Hammerfest. By switching to zero-emission hydrogen technology, these partners join in their goal of reducing greenhouse gas emissions.

The goal of the project is to prepare for an investment decision to retrofit Kvitnos. The project also aims to facilitate long-term hydrogen fuel supply contracts due to the vessel’s fixed route.

Blom Maritime will support naval architects, piping engineers and structural engineers to produce the documentation needed to obtain preliminary approval of the fuel cell and hydrogen solution. Blom Maritime has its main expertise in engineering for retrofitting solutions, a great strength for this project.

Samskip is a multimodal logistics company, offering transport services by land, sea, rail and air around the world. The group has an annual turnover of EUR 900 million, and currently has offices in 24 countries and a network covering 35 countries. Samskip has already one hydrogen powered container vessel under construction in the SeaShuttle project. This new retrofit project with Kvitnos may become Samskip’s second hydrogen project.

Sustainability lies at the centre of Samskip as a company. Samskip is committed to seize every opportunity to become Net-Zero by 2040. This project represents an opportunity to greatly reduce, or even eliminate, all emissions from one of our existing vessels.

Samskip Regional Director Norway and Sweden – Are Grathen: “With the delivery of our LNG propelled multipurpose vessels back in 2015, Samskip already offered one of the world’s most environmentally friendly cargo ships, which eliminated SOx emissions while drastically reducing NOx and CO2 emissions. With this grant from Enova, and in close cooperation with fuel cell provider TECO 2030.

We will continue our endeavour to enable full zero emission propulsion which in turn will further pave the way for our H2-propelled new-builds coming out next year and bring us closer to our net-zero targets for 2040.”  

Samskip Head of Fleet Management – Erik Hofmeester: “Samskip embraces every opportunity to reduce CO2 emissions either through using biofuels, CO2 capture-systems, shore-power, innovative newbuilding vessels , and now also into retro-fits solutions.

Using the power take in device (PTI) driving the propellor with green energy, allowing our existing vessels to sail and manoeuvre emission-free in the Norwegian Fjords and other coastal areas.”

“This grant shows our capability to help our clients secure public funding for smaller pre-studies, this means they can focus on progress towards their ultimate goals of zero emission shipping. Our fuel cell technology is a great match for retrofitting the existing fleet to operate with environment friendly propulsion along the coast,” says Tore Enger, Group CEO, TECO 2030.

Latest News

ZF is using SMM to showcase its latest marine propulsion technologies, including new higher-power transmission and thruster solutions designed for larger, more complex and increasingly hybridised commercial vessels.

ZF Unveils Higher-Power Transmission and Thruster

New ZF 9200 A/V PTI transmission and AT 110 thruster extend the company’s marine portfolio into higher power classes ZF is using SMM to showcase...
Wescom Group will showcase a range of new products at this year’s SMM, alongside its established portfolio of SOLAS pyrotechnics, marine safety electronics and pharmaceutical solutions.

Wescom Reveals Next-Gen Marine Safety Tech

New PLB and EPIRB solutions extend Wescom’s portfolio of connected marine safety and survival technology Wescom Group will use this year’s SMM to showcase a...
Bencros Marine Fenders, the Slovakia-based manufacturer of rubber fenders for ports, tugs and workboats, has announced that the CO₂ savings associated with its recycled-rubber fenders have been independently verified and can now be transferred to customers as certified emission reductions. The first certificates are scheduled to go live on 2 September 2026 through the Proba carbon standard registry.

Bencros Fenders Gain Independently Verified CO₂ Savings

World’s first: Bencros Marine Fenders, issues emission reduction certificates for reprocessed rubber fenders 13,112 tonnes of CO₂e savings independently verified by Bureau Veritas for...
Finnish marine propulsion specialist Steerprop has secured an order from Bollinger Shipyards to supply complete propulsion packages for four Arctic Security Cutters (ASCs) being built for the US Coast Guard. Each vessel will be fitted with two Steerprop Contra-Rotating Propeller (CRP) azimuth propulsors and two tunnel thrusters, providing high manoeuvrability and enhanced performance in demanding Arctic operating conditions

Steerprop Secures Propulsion Deal for Four Arctic Cutters

Steerprop will equip four US Coast Guard Arctic Security Cutters with ice-class propulsion systems Finnish marine propulsion specialist Steerprop has secured an order from Bollinger...

Related news