Deck EquipmentCranesMacGregor introduces an electric transloading crane to complete the electric crane series

MacGregor introduces an electric transloading crane to complete the electric crane series

As part of its mission to support customers with more sustainable products and solutions, MacGregor is proud to introduce the fully electrically driven heavy-duty transloading crane, with the type name “TCE”.

The new heavy-duty transloading crane is a result of combining decades of extensive customer experience in transloading operations. The crane is based on the latest generation of the electric drive system with experience of more than 580 electric cranes delivered since 2007.

Launching the new TCE crane finally closes the gap in MacGregor´s electric crane portfolio, and enables offering the most efficient cranes up to SWL 50t in this demanding segment.

Lower emissions, increased safety and efficiency
Transloading cranes are usually used for heavy-duty work in areas with draft restrictions or limited infrastructure. Consequently, the cranes typically run 24/7 to ensure the most efficient handling of bulk material worldwide.

By electrifying the drive system, MacGregor’s new TCE crane brings efficiency to the next level. In combination with an energy storage system, to get the maximum benefit from the regenerated power, the crane consumes approximately 60% less energy, compared to a hydraulic drive system. As a result, the CO2 emissions will be reduced by more than 5,500t within a typical lifecycle of a hydraulic crane. The amount of reduced emissions is comparable to 1,200 gasoline cars driving 20,000 km per year.*

The electrical drive increases cargo handling safety and efficiency through more precise control with superior operator comfort. Additionally, it increases the turnover capacity performance by more than 10% due to higher speed.

Other major advantages of the new MacGregor TCE crane are potential savings in capital expenditure and lower maintenance costs without the need to change oil, filters and hoses.

The TCE crane can be connected to the OnWatch Scout condition-based monitoring and predictive maintenance service, with the option to include several automation functionalities such as Auto-Grip and Auto-Drive.

*The emission factors for gasoline are from the calculations of  “Greenhouse Gas Emissions from a Typical Passenger Vehicle” – fact sheet by Office of Transportation and Air Quality (EPA-420-F-18-008, March 2018)

Categories:

Latest News

Becker Marine Systems has successfully tested its Anti-Drift Daggerboard system aboard Spirit of Toulouse, a newly built RoRo cargo vessel designed to transport aircraft components for Airbus across the Atlantic.

Becker Daggerboard Boosts Wind-Assisted Propulsion

The Becker Marine Systems Anti-Drift Daggerboard system has successfully completed sea trials aboard the 168-metre Spirit of Toulouse, helping maximise the efficiency of its...
ExploMar Targets Larger Commercial Vessels with New 400HP Electric Outboard ExploMar, a technology company specialising in high-performance electric marine propulsion systems, will offer an early look at its upcoming 400HP electric outboard at METSTRADE 2026, taking place from 17–19 November at RAI Amsterdam (Booth 05.501). The new model signals the company's expansion into higher-power propulsion solutions for larger commercial vessels and more demanding marine operations. Designed to deliver greater power and performance, the 400HP electric outboard aims to extend the potential of electric propulsion across a wider range of commercial applications, including passenger transport, workboats and other vessel operations where performance and operational efficiency are key considerations. ExploMar's existing electric outboard range spans 100HP to 300HP and is already used across fishing boats, passenger ferries, tour boats, patrol boats and aquaculture support vessels. Experience gained from deploying these systems in diverse marine environments has helped establish the company's position in the commercial electric propulsion market and provides a platform for expanding into higher-powered applications. The 400HP model is scheduled to make its official debut at the China (Shanghai) International Boat Show (CIBS) in March 2027, following its preview at METSTRADE 2026. Its introduction will further broaden ExploMar's offering to vessel owners and operators exploring electric propulsion for larger and more demanding commercial fleets.

ExploMar Pushes Electric Outboard Power to 400HP

Building on its existing 100HP–300HP range, ExploMar is targeting larger vessels with a 400hp electric propulsion solution, ahead of its official launch in March...
LD Armateurs (LDA) is strengthening its subsea cable operations with the acquisition of three Platform Supply Vessels (PSVs) for conversion into next-generation cable-laying vessels, alongside the launch of a new training initiative designed to develop the specialist skills required across its growing fleet.

LD Armateurs Invests in Three New Cable-Laying Vessels

Three new Platform Supply Vessels will be converted into next-generation cable-laying ships, with entry into service scheduled for early 2028 LD Armateurs (LDA) is strengthening...
Boluda Towage has completed its acquisition of full ownership of Dutch maritime services company Muller Dordrecht, strengthening its offshore towage and specialist marine project capabilities as part of its continued international expansion.

Boluda Towage Completes Acquisition of Muller Dordrecht

Founded in 1918, Muller Dordrecht joins Boluda Towage with a fleet of 16 tugs, including seven offshore tugs, and eight barges Boluda Towage has completed...

Related news