Ship & Boat BuildingDredgingVan Oord held naming ceremonies for two hybrid water injection vessels

Van Oord held naming ceremonies for two hybrid water injection vessels

Rotterdam, 30 June 2021 – Today, the naming ceremonies have been held for two hybrid water injection vessels. The event took place at the Van Oord head office jetty in Rotterdam.

Ms Karin Schinagl, wife of Managing Director Netherlands Ronald Schinagl, named the vessel Maas. Ms Karien van Oord performed the naming ceremony for the Mersey. Until 2020, she was the chair of the Van Oord Family Council and a member of the MerweOord Board of Directors.

New generation of hybrid water injection vessels

The Maas and Mersey represent the new generation of hybrid water injection vessels. This new vessel type is versatile and has water injection dredging, mass flowing and power jetting systems. Water injection dredging is an efficient and environmentally friendly way of maintaining the depth of navigation channels, ports, marinas and rivers. For over 30 years Van Oord has been using this technique all around the world.

The latest technological developments have been applied to both vessels, such as active heave compensation and dynamic positioning, which means that the dredging can be pre-programmed to a great extent and performed more efficiently. Thanks to the maneuverability and very limited draught, the vessels are perfectly suitable for maintenance dredging in shallow harbours  At the same time they can dredge up to 24 metres water depth and are certified as unrestricted seagoing vessels.

The energy management of both vessels was given special attention. Both vessels are equipped with a hybrid energy management system. Consequently, the vessels can store energy in batteries from residual heat that is normally lost. This energy is subsequently used for purposes including propulsion. Diesel-electric engines will reduce CO2 emissions. The new water injection vessels will comply with the new IMO TIER III legislation for reducing NOx emissions and take account of EU STAGE V legislation. The vessels were delivered by Kooiman Marine Group in Zwijndrecht, the Netherlands.

Investment programme for a sustainable fleet

The two vessels were ordered in 2019 and are part of the Van Oord’s fleet investment programme. Maas and Mersey will replace the first generation of WIDs, which were put into service around 1990. The investments in a modern and energy-efficient fleet demonstrate Van Oord’s confidence in the future for dredging.

To become carbon neutral by 2050 – which is Van Oord’s ambition – Van Oord faces a major challenge and opportunity in terms of finding new fuel technologies for its fleet and adapting its operations accordingly. Steps have been made in its investment programme with the construction of three LNG-fuelled trailing suction hopper dredgers and the ordering of a new green cable-laying vessel with the latest sustainable technologies in order to reduce the carbon footprint.

Waterinjectievaartuig Maas
Water injection vessel Maas
Categories:

Latest News

Trakka Systems has secured a purchase order from Poland’s Maritime Search and Rescue Service (MSPiR) for TrakkaCam TC-300M-E gyro-stabilised imaging systems, with the first two units already delivered for deployment aboard vessels operating in the Baltic Sea.

TrakkaCam Systems Enhances Poland’s Baltic Sea SAR

TrakkaCam Systems imaging technology is being integrated onto Kewatec-built vessels for Poland’s national maritime SAR service Trakka Systems has secured a purchase order from Poland’s...
GONDAN Shipbuilders has launched the 513 OESV (Ocean Energy Support Vessel), at its Figueras facility in Spain, marking the largest vessel built by the shipyard to date. The vessel has been constructed for Norwegian shipowner Østensjø Rederi A/S and was designed by Norwegian naval architecture and marine engineering firm Salt Ship Design. The vessel features advanced engineering and an operationally optimised design for marine energy applications.

GONDAN Launches OESV for Østensjø Rederi

513 OESV is GONDAN’s largest vessel to date, built for the offshore energy market GONDAN Shipbuilders has launched the 513 OESV (Ocean Energy Support Vessel),...
Aesen has announced the introduction of the Aesen 116H, a next-generation hybrid crew boat designed to meet the evolving operational requirements of offshore personnel transportation and infield logistics.

Aesen Unveils Next-Generation Hybrid Fast Crew Boat

Singapore-based owner Aesen takes delivery of Aesen 116H, a new hybrid crew boat designed for high-frequency offshore operations Aesen has announced the introduction of the...
Kongsberg Maritime has signed an agreement with Austal Defence Defence Australia, a subsidiary of Austal Ltd, to supply Kamewa Steel Series waterjets for the Australian Army’s new Landing Craft Medium (LCM) fleet.

Kamewa Waterjets Selected for Australian LCM fleet

Kongsberg Maritime to supply four Kamewa Steel Series waterjets for each of 18 Austal-built Landing Craft Medium vessels Kongsberg Maritime has signed an agreement with...

Related news